Are you looking for a way to add some extra flair to your DIY project? LED strip lights can provide a stunning visual effect, but it's important to have a proper channel to hold and protect them. In this guide, we'll walk you through the process of creating your own DIY LED strip channel.
Materials you'll need:
- Aluminium extrusion profile (length depends on your project)
- End caps (2)
- Diffuser cover (length depends on your project)
- LED strip lights
- Mounting brackets
- Screws
- Screwdriver
- Saw
Step 1: Measure and Cut the Aluminium Extrusion Profile
The first step is to measure and cut your aluminium extrusion profile to the desired length. Use a saw to cut it to the exact length that you need. It's important to measure accurately, so double-check your measurements before cutting.
Step 2: Attach the End Caps
Attach the end caps to the aluminium extrusion profile by sliding them onto the ends of the profile. They should fit snugly, so use a rubber mallet if needed to ensure a tight fit.
Step 3: Attach the Mounting Brackets
Attach the mounting brackets to the back of the aluminium extrusion profile. They should be evenly spaced, and you may need to use a ruler to ensure they're perfectly aligned. Screw the brackets in place using screws and a screwdriver.
Step 4: Insert the LED Strip Lights
Insert the LED strip lights into the channel of the aluminium extrusion profile. Make sure they're placed securely and evenly.
Step 5: Install the Diffuser Cover
Slide the diffuser cover onto the aluminium extrusion profile, covering the LED strip lights. This will help diffuse the light and provide a more even glow.
Step 6: Mount the Channel
Finally, mount the channel onto your project using the mounting brackets. You can use screws to secure the channel in place.
Congratulations! You've successfully created your own DIY LED strip channel. Now you can enjoy the beautiful lighting effect it provides in your next project.